| After-sales Service: | Yes |
|---|---|
| Warranty: | 18 Months |
| Driving Type: | AC Elevator |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Our passenger elevators help passengers reach their floors low noise, quickly, comfortably, and safely. For tenants, they provide quiet operation, which is especially important at night. For architects, they are easy to integrate into designs and help optimize available building space. For building owners, they help reduce total lifetime costs by providing excellent maintainability and reduced energy consumption.
Spacious elevator cars enable passengers and their luggage, or staff and their equipment, to travel comfortably and efficiently through the buildings.
We have a professional technical team to provide the most suitable solution based on your well parameters and on-site conditions. If you have your own ideas, we will also try our best to meet them on the premise of safety and rationality
More Car Styles
Function Configuration
| Travel function | VVVF drive | Motor rotating speed can be precisely adjusted to get smooth speed curve in elevator's start, travel and stop and gain the sound comfort. |
| VVVF door operator | Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start / stop. | |
| Independent running | The elevator can not respond to outer calling, but only respond to the command inside the car through the action switch. | |
| Automatic pass without stop | When the car is crowded with the passengers or the load is closed to preset value, the car will automatically pass the calling landing in order to keep maximum travel efficiency. | |
| Automatically adjust door opening time | Door-open time can be automatically adjusted according to the difference between landing calling or car calling. | |
| Reopen with hall call | In the door closing process, press reopen with hall call button can restart the door. | |
| Express door closing | When the elevator stops and opens the door, press door-close button, the door will be closed immediately. | |
| Car stops and door open | The elevator decelerates and levels, the door only opens after the elevator comes to a complete stop. | |
| Car arrival gong | Arrival gong in the car top announces that the passengers arrive. | |
| Command register cancel | If you press the wrong floor command button in the car, twice continuous pressing of the same button can cancel the registered command. | |
| Direct parking | It completely accords with distance principle with no crawling in the leveling. It greatly enhances the travel efficiency. |
| Safety function | Photocell protection |
In the door open and close period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects. |
| Designated stop | If the elevator can not open the door in the destination floor out of some reason, the elevator will close the door and travel to the next designated floor. | |
| Overload holding stop | When the car is overload, the buzzer rings and stops the elevator in the same floor. | |
| Anti-stall timer protection | The elevator stops operation due to slippery of the traction wire rope. | |
| Start protection control | If the elevator does not leave door zone within the designated time after it starts, it will stop the operation. | |
| Inspection operation | When the elevator enters into inspection operation, the car travels at inching running. | |
| Fault self-diagnosis | The controller can record 62 latest troubles so as to quickly remove the trouble and restore the elevator operation. | |
| Repeated door closing | If the elevator can not close the door due to certain obstacle or interference, the elevator will reopen or reclose the door until sundries are eliminated. | |
| Up/down over-run and final limit protection | The device can effectively prevent from the elevator's surging to the top or knocking the bottom when it is out of control.It results in more safe and reliable elevator travel. | |
| Down over-speed protection | When the elevator's down speed is 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop elevator down at over-speed. If the elevator continues to device down at over-speed, and if the speed is 1.4 times higher than rated speed, safety tongs act to force the elevator stop in order to ensure the safety. | |
| Upward over-speed protection device | When the elevator's up speed is 1.2 times higher than rated speed, the device will automatically decelerate or brake the elevator. |
| Energy-saving function |
Car ventilation, light automatic shut off | If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save the energy. |
| Remote shut-off | The elevator can be called to base landing (after finishing the service) through the key switch and automatically exists the service. |
We are a modernized and professional elevator & escalator group which integrates the design, development, manufacturing, sales, installation, and maintenance into a whole. We are becoming a R&D center with specialized division and cooperation for elevator & escalator.
Q1. What's the necessary information should be provided before purchasing an elevator?
1).How many people loading? (6persons means 450kg, 8persons means 630kg, 10persons means 800kg,13persons means 1000kg etc.)
2).How many floors does the elevator travel?
3).What's the shaft size? Shaft width and shaft depth?
4).Is there a machine room on top of the shaft?
When we get the answers, we can design exact elevator and make an quotation to you.
Q2. What about your price level?
Our price is in the middle level in market. Our price is lower, however, we want to make good enough elevator and escalator, so we use the best parts from the best suppliers to guarantee the quality, that means our cost is not low, so we can't give price so low as the other elevator suppliers. You can find out lower price than ours in the market. So all of our clients are middle level people or companies, they like lower price but not dreed, they require good quality and not limit.
Q3. How long is the production cycle of the elevator?
Usually 25days, but urgent production, for example 20days is also available.
Q4. How to do the elevator installation?
Normally, local people can do that job with our provided manuals and technology support. You can ask the local professional elevator engineers or technician to install elevators for you, that's the long time solution. You can also ask our engineers to go to your site to do that job but the cost will be much higher and maintenance job will be still given to local people for the rest time after installation. Remember that installation is the most important. Even if the elevator quality is good enough, but the installation is bad, then the elevator will run with many problems.
Q5. How about your aftersales service?
We have a long-time and regular aftersales service system both in maintenance solution and spare parts provision. We have regular on-site inspection plan for all installed elevators by our agents or by our engineers timely, to ensure the elevator and escalator run-ning with stable performance all the time.
){kind=link}